← Back to blog

MFE MAE Analysis: How to Read Your Trades

November 17, 2026
MFE MAE Analysis: How to Read Your Trades

MFE and MAE analysis measures what a trade did while it was open, not just how it ended. Maximum favorable excursion (MFE) is the best unrealized profit a trade reached. Maximum adverse excursion (MAE) is the worst unrealized loss it suffered. Put both next to the final result across a sample of trades, and you can see whether your stops are too tight or too loose and whether you give profit back before you exit. Win rate alone cannot show you either.

This guide covers the definitions, the formulas for longs and shorts, a worked example you can copy into a spreadsheet, how to read the numbers across many trades, and how to adapt the method to crypto, forex and stocks. If you want the logging and review handled for you, Discipline AI includes automated trade journaling and performance analytics in the same mobile app as its paper trading and trade planning tools.

Disciplineaiapp
Turn Trade Paths Into Clearer Reviews
Review trade outcomes with journals, performance analytics, and AI Trade Autopsies, alongside tools for planning and paper trading.
Visit

TL;DR

  • MAE is the largest move against your entry while a trade is open. MFE is the largest move in your favor. Both are measured from entry, before the exit.
  • For a long, MAE is entry minus the lowest price and MFE is the highest price minus entry. For a short, the two reverse.
  • Exit efficiency (realized move divided by MFE) shows how much of the available move you captured. MAE relative to your stop shows how close winners came to being stopped out.
  • One trade proves nothing. You need a meaningful sample of trades, measured in multiples of risk, before you change a stop or target.
  • The numbers describe distance, not cause. Always compare them with the plan you had when you entered.

Table of Contents

What MAE and MFE mean

Every trade travels a path between entry and exit. The final profit or loss is only the last point on that path. Two trades can both close at +1R (one unit of initial risk, meaning the amount you stood to lose if your stop was hit) and have completely different stories. One may have gone straight up. The other may have dipped almost to the stop before recovering.

Maximum adverse excursion captures the dip: the furthest the price moved against you after entry. Maximum favorable excursion captures the peak: the furthest the price moved in your favor. Neither one is a result you actually banked, which is why they never appear in a plain win/loss tally. They are the hidden half of the trade.

The two questions they answer are different:

MetricWhat it measuresQuestion it answers
MAEWorst unrealized loss during the tradeIs my stop in the right place?
MFEBest unrealized gain during the tradeIs my exit or target in the right place?
MFE vs. final resultGap between the peak and what you keptAm I giving profit back?

How to calculate MAE and MFE

You need three things per trade: the entry price, the direction, and the highest and lowest prices that traded between entry and exit. Use a price source with enough resolution. Daily highs and lows are too coarse for intraday trades, so pull the candles that cover the holding period, for example 1-minute or 5-minute bars for a scalp.

With entry E, lowest price L and highest price H during the trade, the formulas are:

DirectionMAEMFEFinal move (exit C)
Longmax(0, E − L)max(0, H − E)C − E
Shortmax(0, H − E)max(0, E − L)E − C

The max(0, …) simply means an excursion cannot be negative: if the price never went against you, MAE is zero.

Two details trip people up. First, direction decides everything. A worked EUR/USD example with an entry at 1.0800, a high of 1.0832 and a low of 1.0785 gives a long an MFE of 32 pips and an MAE of 15 pips, while a short on the same levels has an MFE of 15 pips and an MAE of 32 pips. Second, stop at your exit. Prices after you close the trade do not count, and including them is the most common spreadsheet error. In one published example with the price path 100, 98, 101, 105, 102, moving a long exit from 102 to 101 changes MAE to 2, MFE to 1 and the final result to +1, because the later prices are excluded.

Long and short MAE MFE comparison

For forex, a practical note: a long closes at the bid and a short closes at the ask, so measure longs against the bid path and shorts against the ask path if you want spread-accurate figures.

Converting to money

Price distance is useful, but you often want dollars. The conversion is price move times quantity times the contract multiplier, where the multiplier is 1 for ordinary shares and contract-specific for futures and options. For forex, divide the price distance by the pip size to get pips first, then convert using your position size.

A worked example you can copy

Suppose you buy a coin at $100.00 with a stop at $96.00, so your risk is $4.00 per unit, or 1R. While the trade is open the price drops to $98.00, rallies to $109.00, then you sell at $106.00.

  • MAE = 100 − 98 = $2.00, which is 0.5R
  • MFE = 109 − 100 = $9.00, which is 2.25R
  • Final move = 106 − 100 = $6.00, which is 1.5R
  • Exit efficiency = 6 ÷ 9 = 66.7%

Read it: the trade used half of its risk allowance on the way down, peaked at more than twice your risk, and you kept about two thirds of the peak. That is one data point. The value appears when you have forty of them.

Exit efficiency and the capture ratio

Exit efficiency, sometimes called the capture ratio, is the realized price move divided by the MFE price move. A 60% reading means the exit captured 60% of the best available move, and a losing trade can produce a negative value. In a long EUR/USD example entered at 1.0850 with a 1.0820 stop, a lowest bid of 1.0830 gave an MAE of 20 pips, two thirds of the 30-pip stop. A highest bid of 1.0905 gave an MFE of 55 pips, and an exit at 1.0890 realized 40 pips, a capture ratio of about 72.7%. That figure describes that one path. It is not a universal target.

Use the ratio as a comparison against your own history. If it sits near the same level across a stable sample, your exits are consistent. If it is low on trades you managed by hand and higher on trades that hit a pre-set target, your discretionary exits are the thing to examine.

Reading MAE and MFE across many trades

The real analysis starts when you log every trade and compare the columns. The first step is to express every excursion in R, the multiple of your initial risk, so that a $2 move on a stock and a 0.3% move on a forex pair can sit in the same table.

Why R beats pips and dollars

Pips and dollars only compare within one market. Ten pips in EUR/USD is not comparable to ten pips in the more volatile GBP/JPY, and a $25 MFE in a stock cannot be set against a $25 MFE in a currency pair. Excursion as a multiple of risk is the common yardstick, which is why serious reviews use R for MAE and MFE alike. This is the reason the method travels well between crypto, forex and equities: volatility differs wildly, but 0.5R of adverse movement means the same thing everywhere.

What to look for

Split your trades into winners and losers, then ask these questions of each group.

  1. How deep did winners dip? If most winners had an MAE of under 0.4R, your stop sits well beyond where good trades go. If a large share of winners dipped to 0.8R or 0.9R, your stop is right at the edge of the zone where winning trades live, and a small tightening would have turned many winners into losses.
  2. How far did losers go before dying? If losing trades regularly showed an MFE of 1R or more before reversing to the stop, you had a profit available and gave it all back. A partial exit or a break-even rule is worth testing on those.
  3. How big is the gap between MFE and result on winners? A large, consistent gap suggests exiting too early or too late, depending on whether the price kept running or reversed.
  4. Is MAE consistently larger than MFE? QuantifiedStrategies notes that when MAE is regularly much bigger than MFE, you are risking significantly more than you stand to gain, which points to a flaw in the exit strategy.

Sample size and context

A handful of trades is noise. The same QuantifiedStrategies piece stresses that you need a significant sample so the results reflect market conditions and not outliers. Keep setups separate: a breakout and a pullback entry have different excursion profiles, and averaging them hides both.

Also remember what the numbers cannot tell you. MarketGB's editorial team points out that these figures record distance, not cause. A large MAE followed by a profitable exit does not prove the trade was acceptable or that the recovery will repeat, and the figures should be compared with the trade's original plan, not treated as instructions. If your plan said you would be wrong at 1R and the trade went to 0.9R before working, that was a close call, not a lesson that the stop can be 0.9R wider.

Market conditions matter too. A trending week and a choppy week produce very different excursions for the same setup. Tag each trade with the market regime (trending, ranging, high volatility) so you can see whether a pattern belongs to your setup or to the environment. The same logic is behind out-of-sample testing, which checks that a pattern survives in data it was not built on.

Sample size and context

Using the results for stops, targets and risk/reward

MAE and MFE should change a rule only when the evidence is consistent. Here is how the results translate into decisions.

What you seeA reasonable test to run
Winners rarely exceed 0.5R of MAE, but your stop is 1RTest a tighter stop. Expect it to catch fewer winners and more losers, so compare expectancy, not win rate
Many winners reach 0.8R+ MAE before recoveringKeep or modestly widen the stop; tightening would cut good trades
Losers regularly show 1R+ MFETest a partial profit target or a break-even move
Winners show large MFE but small resultsTest a trailing stop or a more ambitious target
Exit efficiency is stable and highLeave the exit alone and look at entries

The trade-off is real and worth stating plainly. Optimus Futures explains that a trader with very low overall MAE could potentially use a tighter stop to raise expectancy, but a tighter stop usually produces a higher loss rate, and a high MFE on losing trades points toward more conservative profit targets. Always judge a change by expectancy and by profit factor, not by one metric. Our guide to profit factor shows how to pair it with excursion data.

Change one rule at a time, and test it forward, not just on the history that suggested it. Tuning a stop to the exact MAE distribution of past trades is a classic way to overfit. Our walkthrough of forward testing shows how to run a new rule in real time without risking capital.

Applying it to crypto, forex and stocks

The math is identical in every market. What changes is the data and the traps.

Crypto. Markets trade around the clock and wicks can be violent, so the high and low during your hold matter more than the candle close. Use the exchange you actually traded on, since wick extremes differ between venues. Express excursions in R, because a coin with 8% daily swings and one with 2% swings are not comparable in percent or dollars.

Forex. Work in pips, then convert to R. Use bid and ask paths as described above, and remember that spread widens around news, which can inflate your MAE on paper.

Stocks. Use dollars per share or percent, multiplied by share count. Gaps overnight can make MAE larger than your stop on a position held across sessions, because the stop did not fill at its level. Record that honestly: it is information about overnight risk, not a data error.

Leverage and fees. Excursions measured on price ignore leverage. If you trade a leveraged product, convert to account terms as well, since an MAE that looks tame in price can be a large share of margin.

Limits of the method

  • It is backward looking. The distribution of excursions from last quarter is not a forecast.
  • It depends on data quality. Coarse candles or the wrong price feed give wrong excursions.
  • It tells you distance, not why. Pair it with notes on what you were thinking, which is where a structured trade autopsy helps.
  • It is only as good as your logging. A missed trade or an inconsistent stop definition corrupts the sample. A short, repeatable outcome tracking routine fixes most of this.

Doing it without the spreadsheet

The manual method works, but it is tedious: pulling candles for every trade, matching timestamps, applying long and short formulas and converting to R. That friction is why most traders do it for ten trades and quit. Discipline AI is a mobile app for crypto, forex and stock traders that includes automated trade journaling and performance analytics, execution quality scoring, paper trading with P&L tracking and market replay simulation, so the record of what you did and how it turned out builds as you trade and practice. Pro starts at $8.99 per month, or $79.99 per year, and the app is on iOS and Android. It does not guarantee profitable trades. It is built to give you measurable evidence about your own decisions.

See the plans on the pricing page.

Disciplineaiapp

If you want a structured way to build habits around review, The Disciplined Trader is a $79 one-off offer from us.

Perspective

Most traders can tell you their win rate. Very few can tell you how close their winners came to being stopped out, or how much profit their losers were sitting on before they reversed. That is the gap MAE and MFE fill, and it is why we care about evidence over predictions.

At Discipline AI we evaluate results on win rate, risk-adjusted expectancy, reward-to-risk outcomes, market compatibility and sample size, because a single number never tells the truth about a strategy. Excursion data belongs in the same family: it is another way of asking what the evidence says, instead of what we hoped would happen.

Our view is that discipline is built from a loop: understand conditions before entering, plan the risk, practice execution in paper trading, then learn from the outcome. Measuring a trade's path, not just its endpoint, is part of closing that loop. We built the platform around that loop, with journaling, performance analytics and AI Trade Autopsies, so that review becomes routine and not a weekend chore you skip.

Sentinel, our research system, studies market structure, volatility and regimes because the same setup behaves differently in different conditions. That is the lesson excursion analysis teaches too: context first, numbers second.

Tony

FAQ

What is MAE in trading?

MAE stands for maximum adverse excursion. It is the largest unrealized loss a trade showed between entry and exit, measured from the entry price. A long that was bought at $50, dipped to $48 and later closed at a profit has an MAE of $2.

What does MFE mean in trading?

MFE stands for maximum favorable excursion: the largest unrealized profit a trade reached while open. If that same $50 position peaked at $56 before you sold at $54, the MFE is $6 and the exit captured $4 of it, about 67%.

How is MFE calculated for a short trade?

For a short, the logic flips. MFE is the entry price minus the lowest price reached while the trade was open, and MAE is the highest price reached minus the entry price. Identify the direction first, because the same price levels give opposite answers for a long and a short.

How many trades do I need before MAE and MFE results mean anything?

There is no universal number, but results from a few trades are mostly noise. Collect a meaningful sample for each setup separately, express excursions in R, and confirm any change by running it forward before you rely on it.

Can MAE and MFE tell me where to put my stop?

They can guide a test, not set the answer. They show where your winning trades tend to dip and where your losers peaked, which suggests candidate stop and target changes. Evaluate each candidate by expectancy, because a tighter stop usually raises the loss rate.

Sources